1H-Isoindole-1,3(2H)-dione, 2-(phenylthio)-
N-(phenylthio)phthalimide
CAS: 14204-27-4
Molecular Formula: C14H9NO2S
1H-Isoindole-1,3(2H)-dione, 2-(phenylthio)- - Names and Identifiers
| Name | N-(phenylthio)phthalimide |
| Synonyms | N-(Phenylthio)phthalimide N-(PHENYLTHIO)PHTHALIMIDE N-(phenylthio)phthalimide 2-(Phenylthio)isoindoline-1,3-dione 2-(Phenylthio)-1,3-isoindolinedione 1H-Isoindole-1,3(2H)-dione, 2-(phenylthio)- 2-(phenylsulfanyl)-1H-isoindole-1,3(2H)-dione |
| CAS | 14204-27-4 |
| InChI | InChI=1/C14H9NO2S/c16-13-11-8-4-5-9-12(11)14(17)15(13)18-10-6-2-1-3-7-10/h1-9H |
1H-Isoindole-1,3(2H)-dione, 2-(phenylthio)- - Physico-chemical Properties
| Molecular Formula | C14H9NO2S |
| Molar Mass | 255.29 |
| Density | 1.42±0.1 g/cm3(Predicted) |
| Melting Point | 160-163°C(lit.) |
| Boling Point | 432.2±28.0 °C(Predicted) |
| Flash Point | 215.2°C |
| Solubility | DMSO: soluble25mg/mL, clear, yellow |
| Vapor Presure | 1.13E-07mmHg at 25°C |
| Appearance | powder to crystal |
| Color | White to Light yellow |
| pKa | -3.05±0.20(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.723 |
| MDL | MFCD00192396 |
1H-Isoindole-1,3(2H)-dione, 2-(phenylthio)- - Risk and Safety
| Safety Description | 24/25 - Avoid contact with skin and eyes. |
| WGK Germany | 3 |
| HS Code | 29309090 |
1H-Isoindole-1,3(2H)-dione, 2-(phenylthio)- - Introduction
N-(phenylthio) phthalimide, also known as BT-4, is an organic compound. Its chemical formula is C14H10N2O2S.
Properties: BT-4 is a yellow crystalline solid. It is insoluble in water at normal temperature, but soluble in organic solvents such as ethanol and methylene chloride. It has a lower melting and boiling point.
Application: BT-4 is widely used in organic synthesis. It can be used as a catalyst in some organic reactions, such as imidization, acylation and oxidation reactions. In addition, it can also be used in the synthesis of biologically active compounds, such as drugs and dyes.
Preparation method: The preparation method of BT-4 is usually obtained by reacting benzothiophene (triazoline) with phthalimide. Specific steps: first, benzothiophene and phthalimide are reacted in an appropriate solvent, and the target product can be obtained through reaction, separation, purification and other steps.
Safety information: The BT-4 is stable under normal conditions, but explosive decomposition may occur under high temperature, high pressure, open flame, etc. During operation, contact with strong oxidants and strong acids should be avoided. At the same time, care should be taken not to inhale its dust or contact with skin and eyes, and appropriate protective equipment such as gloves and goggles should be worn. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical help. During use and storage, a well-ventilated environment should be maintained.
Properties: BT-4 is a yellow crystalline solid. It is insoluble in water at normal temperature, but soluble in organic solvents such as ethanol and methylene chloride. It has a lower melting and boiling point.
Application: BT-4 is widely used in organic synthesis. It can be used as a catalyst in some organic reactions, such as imidization, acylation and oxidation reactions. In addition, it can also be used in the synthesis of biologically active compounds, such as drugs and dyes.
Preparation method: The preparation method of BT-4 is usually obtained by reacting benzothiophene (triazoline) with phthalimide. Specific steps: first, benzothiophene and phthalimide are reacted in an appropriate solvent, and the target product can be obtained through reaction, separation, purification and other steps.
Safety information: The BT-4 is stable under normal conditions, but explosive decomposition may occur under high temperature, high pressure, open flame, etc. During operation, contact with strong oxidants and strong acids should be avoided. At the same time, care should be taken not to inhale its dust or contact with skin and eyes, and appropriate protective equipment such as gloves and goggles should be worn. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical help. During use and storage, a well-ventilated environment should be maintained.
Last Update：2024-04-09 21:11:58
Supplier List
Spot supply
Product Name: N-(PHENYLTHIO)PHTHALIMIDE Visit Supplier Webpage Request for quotationCAS: 14204-27-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: N-(PHENYLTHIO)PHTHALIMIDE Visit Supplier Webpage Request for quotationCAS: 14204-27-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History